Connect a PC to a Commodore 1541/1571 drive

Did you ever want to transfer files from your old Commodore 1541/1571 drive between your computer and a real drive? Did you also want to use a real Commodore floppy drive with the VICE emulator? Me too! 😉 Both of these things are possible with the zoomfloppy device being offered by Retro Innovations. You can download basically anything you want from (or any other commodore software source) and transfer it right to your floppy device so it can be used on a real Commodore 64 or Vic 20.

This device is unlike other solutions that only worked with specially built cables and DOS. You simply plug a USB cable between your zoomfloppy and your computer and then the serial cable between the zoomfloppy and the floppy drive. Once the physical connections are made, you simply run the OpenCBM software to transfer files or backup disks.
Here’s how to install a zoomfloppy device to your Ubuntu computer.

sudo apt-get install libusb-dev build-essential linux-headers-generic git

Install the CC64 Compiler:

cd ~
git clone
cd cc65
sudo prefix=/usr make install

Compile and install OpenCBM

cd ~
git clone git:// opencbm
cd opencbm/opencbm
make -f LINUX/Makefile
sudo make -f LINUX/Makefile install install-all install-plugin-xum1541
sudo ln -s /usr/local/lib/ /usr/lib/

Add udev rules for the ZoomFloppy hardware itself:

sudo pico /etc/udev/rules.d/45-opencbm-parallel.rules

Add this to the bottom of the file, then save and quit:

SUBSYSTEM!="usb_device", ACTION!="add", MODE="0666", GOTO="opencbm_rules_end"
# zoom floppy
ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0504", GROUP="users", MODE="0666"

Restart udev:

sudo service udev restart

Check the ZoomFloppy and IEC device status:

cbmctrl detect

Bonus: Get VICE to use the zoomfloppy interface to utilize a real 1541 Commodore Floppy Drive!

1. Settings -> Peripheral Settings -> Device #8 -> Enable IEC Device
2. Settings -> Peripheral Settings -> Device #8 -> Device Type -> Real Device Access

Commodore 64 (Vic 20, Pet, etc) emulator from Raspberry Pi Raspbian

I can confirm this install method (source) worked with a Raspberry Pi 4 using Raspbian Buster.
Compiles Vice and installs into /usr/local/bin. Initial launch reports a sound issue. If you go into settings (F12), there’s a sound configuration you can change to “Alsa”.

# get dependencies – this may take a long time and ~ 1.5 GB
sudo apt install autoconf automake build-essential byacc dos2unix flex libavcodec-dev libavformat-dev libgtk2.0-cil-dev libgtkglext1-dev libmp3lame-dev libmpg123-dev libpcap-dev libpulse-dev libreadline-dev libswscale-dev libvte-dev libxaw7-dev subversion texi2html texinfo yasm libgtk3.0-cil-dev xa65 libsdl2-dev
mkdir -p src
cd src
svn checkout trunk
cd trunk/vice
make -j4
sudo make install

Install Linux console programs like Lynx on Mac OSX

You can install much loved Linux console programs like Lynx (text web browser) and Midnight Commander (powerful file browser) on Mac OSX using homebrew program installer “Brew”.

Example: Install Lynx
First you must install Brew. After this, you can install other programs with Brew.

ruby -e "$(curl -fsSL" < /dev/null 2> /dev/null

Now use Brew to install Lynx:

brew install lynx

Now you can test it out:


Did you see in a text browser?

Try installing the Midnight Commander:

brew install mc

You can check out the “Brew” homepage and use the search for new programs to install. You can also very how many programs you have installed with this command:

brew list

I love Mac OSX but I can’t live without Lynx. Web surfing without busy ads and pictures. Enjoy!